Undergoung Utilities and their Standard Colors
If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. If there is a need to dig the ground, it is very important that the utility lines first be identified. If you need to dig through a piece of land today, you are required by the OSHA to first identify or locate underground utilities. Otherwise it can be something disastrous. If you hit any of the underground utility lines while digging then you can be fatally injured. Services in the area where the lines are located can experience interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.
But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. Public heath and safety is affected when this happens.
Companies can locate utility lines through the use of GPR or Ground Penetrating Radar. This has made it easier to locate utility lies underground and other important things. Calling 811 is enough for the property owner to let companies located their lines.
Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.
Proposed excavation sites use white lines. It locates areas that will be excavated in the near future.
If you see pink lines, they are temporary survey markings. Legal property boundaries are marked off by these pink lines.
If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is perfect for electric works because it is associated with fire and danger.
Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.
If you see orange lines, then you should associate this with communication., alarm, signal lines, cable or conduit. If you see blue lines then these are lines for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. If you see the color green, then it indicates sewer and drain lines. You can derail any project for a long time if you hit these lines.